Product Description

Wire mesh belt shot blasting machine is used in foundry castings and similar components.  It composes of automatic loading, unloading, offload conveyors, and PLC for part memory and control of the shotblasting system.
Very high performance shotblasting machine is able to shot blast small and medium dimension work pieces and castings.
The pieces are fed by a metallic belt conveyor. These machines can treat very fragile pieces because the parts being shot blasted do not touch one another during the shotblasting process.
Wire Mesh Belt Systems provide high-volume, cost-effective performance for deburring,cleaning, descaling, deflashing or etching. These systems are extremely versatile and built to accommodate medium-to-large die castings, heat-treated parts, automotive wheels, ferrous and non-ferrous castings, weldments and fabrications and more.
This wire mesh is made of heavy-duty reinforced blast compartment with manganese wear resistant steel.
A key advantage with a mesh belt is that the parts are exposed to the blast wheels from all sides.
The wire series of machines is a pass through wire mesh conveyor type machine for the blasting of small to medium sized work pieces.  Work pieces with overall dimensions and weight not exceeding the specifications can be blasted in continuous operation.  Work pieces are placed onto a steel wire mesh conveyor and transported through the blast cabinet where blast wheels are located above and below the conveyor to ensure that all work piece surfaces are exposed to the blast stream.  After blasting, the work pieces are dropped off of the end of the conveyor into a receiving container or onto another conveyor.  Optionally, a kickoff roller can be placed at the end of the conveyor to assist in the removal of the work pieces.

All Disa shot blast machines include an integral abrasive recovery and cleaning system.  After passing through the blast wheel, the abrasive is collected, separated from the resulting dust and other contaminants, and then stored in a hopper, ready for reuse.  Collected contaminants are stored in a separate hopper for periodic disposal.  
All machines utilize replaceable highly wear resistant materials in critical locations.  All machine control systems are pre-piped and pre-wired.  All machine dust exhaust ports are pre-piped to a central collection point, ready to be connected to an external dust collector or optionally, a fully integrated dry cartridge type dust collector can be provided.
Features:
In-line operation, continuous blast cleaning
Clearly arranged manufacturing sequences
Improved manufacturing consistency
Short transport distances (no intermediate storage)
Reduced operating costs
No manipulation with uncleaned castings
User specific design of loading/unloading area (manual or automatic parts handling)
Description:
Blasting of flat, thin-walled and fragile iron or aluminium alloy castings
Smooth and shockless passage of the parts through the machine
Simultaneous abrasive impingement from above and below to prevent deformation of the parts
Smooth process flow
Reduction of operating costs by integration of blasting process into automatic production lines

Technical Parameters

Machine Type

DSWD600

DSWD800

DSWD1000

DSWD1250

DSWD1500

Max.workpiece dimensions xb (mm)

600X400

500X800

1000X500

1250X600

1500X600

Number of wheels

4

4

4

6

8

Wheel motor power (kW)

7.5

11

15

15

15

Total installed power (kW)

37

53

73

111

150

Exhausted air quantity(m3/h)

4000

6000

8000

27000

36000

Compressed air connection (inch)

3/8

3/8

3/8

3/8

3/8

Max. height (mm)

4900

5100

5300

5600

6000

Max. width (mm)

3100

3300

3600

4100

4500

Max. length (mm)

7500

9500

9500

10500

11500

Product Details

Demo Video

Equipment Shortcut