How to correctly apply the hook type shot blasting machine

Forging shot blasting machine with a hook type shot blasting machine, shot blasting machine generally means forging descaling forging surface, are generally used in blasting machine shot blasting machine has several general classification: crawler shot blasting machine, shot blasting machine, roller type hook type shot blasting machine, shot blasting machine, steel catenary type the structure of steel shot blasting machine, shot blasting machine, shot blasting machine profiles and so on, here for you to explain a forging shot blasting machine in application of hook type shot blasting machine
A forging hook type shot blasting machine, shot blasting machine hook type shot blasting machine is the workpiece hanging on the hook, hook the workpiece conveying system forward conveying system, the hook is provided with a limit switch, when the workpiece into the cleaning chamber reaches a limit switch, blasting order work, work time for 4-8 minutes after the blast after treatment, the steel surface oxide skin, dirt and other attachments were clean, the surface can reach Sa2-2.5 after treatment. Shot blasting machine work is continuously carried out of the cycle. Throw shot after shot blasting machine circulating system for collecting and processing, continue to use for shot blasting machine. The circulatory system works: the scattered projectile is carried through screw conveyor to lower bucket elevator, bucket elevator and debris pill material to clean the room on the slope to the upper, conveyed by the efficient BE separator separator after BE treatment, dust and debris separation and good shots, shots are good enter the storage hopper to be used for storage, shot blasting machine. In order to produce a lot of dust when blasting, the machine is equipped with dust remover, the purified air is much lower than the same industry soot emission standards.
The main technical parameters:
1, clean room size (length * width * height) 1500 * 1500 * 3350mm
2, cleaning up a hook workpiece required time: 4-8min
3, shot blasting machine: 3 sets of Q034M (patent technology)
The impeller diameter 250mm speed 2900r/min
The maximum shot blasting quantity is 3 * 300kg/min 3 * 7.5kW motor power
4, the required projectile diameter 0.3-0.6mm
5, lifting machine
Belt speed 1.14m/s bucket distance 250mm
Lifting capacity 60t/h motor power 4kw
6, screw conveyor
Screw diameter 250mm helix pitch 240mm
Transport volume 60t/h
7, separator (patent technology)
Separation rate of 60t/h separation zone wind speed 4-5m/s
Outlet wind speed 8-15m/s
8, hook (two sets)
Hook load 1000kg
Rotation speed 2.8r/min motor power 0.37kw
Running speed 20m/min motor power 0.2KW * 2
Lifting speed 8m/min motor power 3kw * 2
9, the first shot into the amount of 2000kg
10, ventilation 11000m3/h
11, dust removal equipment (two dust)
Fan power 7.5kw
12, the total power of the machine is about 40kW