How to Repair and Maintain shot blasing machine?
1. Always check inside the shot blasting chamber, interior linings, etc., should be immediately replaced after wear.
2. Regularly check the wear of blast wheel inside, wear over the limits that should be replaced, especially leaves, directed sets, sub-pill wheel and impeller should pay attention to, if not promptly replaced, would generate abnormal vibration, ability to shot down, also whole body vibration. Another blast wheel liner wear, if serious, it should be replaced, otherwise the blast shell of easy to wear, or even breakdown, causing the projectile flying machine, the harmful environmental and personal safety.
3. Shot blade replacement, be sure to balance and shot blasting chamber orientation sets the adjustments. Replacement blades, generally the opposite direction is symmetrical to replace the two blades, the weight must be equal.
4. Regularly check whether the oil seal leakage, regular open repair blast wheel spindle.
5. Regular cleaning both inside and outside the body to keep clean. Dust regularly inspected bodies, with particular attention to parts of the bearing to prevent the dust into the bearings inside the bearing damage.
6. Lubrication of the machine is properly will seriously affect the life and good machine performance and must therefore be carried out step by step correct lubrication and maintenance, please press the table Lubrication:
Lubrication oil lubrication time point
